In
Posted

CX-NO2 Sensor

Used with CX-6 and CX-12 Field replaceable Nitrogen Dioxide (NO2) sensor for CX-6 and CX-12 (Please see detector manual for sensor replacement instructions)

Features

    [...]

In
Posted

CX-CO Sensor

Used with CX-6 and CX-12 Field replaceable Carbon Monoxide (CO) sensor for CX-6 and CX-12 (Please see detector manual for sensor replacement instructions)

Features

    [...]

In
Posted

CD6B-FCK

CD6B-FCK (Carbon Dioxide Calibration Kit) Used with CD-6B This Carbon Dioxide (CO2) Gas Field Calibration Kit comes with; 17L 400 ppm, 17L 50,000 ppm, Carry Case, [...]

In
Posted

OX Sensor

Used with OX-6 and OX-12 Field-replaceable Oxygen sensor for OX-6 and OX-12 (Please see detector manual for sensor replacement instructions)

Features

  • Size: 2 x [...]

CX-FCK

Used with CX-6 and CX-12 This Carbon Monoxide (CO) and Nitrogen Dioxide (NO2) Gas Field Calibration Kit comes with; 34L 200PPM CO, 34L 5PPM NO2, 0.2 LPM Regulator (M), Carry Case, [...]

CX-12

The CX-12 line voltage dual monitor detects Carbon Monoxide and Nitrogen Dioxide in commercial facilities. It can be used as a stand-alone detector, controller and as an analog transducer for use [...]

CX-6

The CX-6 low voltage dual monitor detects Carbon Monoxide and Nitrogen Dioxide in commercial facilities. It can be used as a stand-alone detector, controller and as an analog transducer for use [...]

In
Posted

PM Link

PC Interface for AimSafety devices

The PM Link is used with the AimSafety monitors and calibration stations. The PM Link is used for configuration of your AimSafety devices, firmware [...]

In
Posted

TXP-T30

The TracXP TXP-T30 universal transmitter can be configured in single or dual sensor configurations to allow Electrochemical and Bridge (Catalytic Bead or Infrared) sensor inputs such as [...]

page 1 of 3